2011年10月20日 星期四

License to Spill? Not quite.

You have dirty, stinky grout. There, I said it. Now that we’ve laid that bare, you have two choices: You can stare straight ahead at all times, employing a horizontal take on the “head-in-the-sand” strategy, or you can get scrubbin’! Oh, I guess there’s a third option—hire somebody else to take care of it.

Let me tell you a thing or two about grout before you spend time/money and wind up with a sad little scrunched up face. All the scrubbing, bleaching and elbow grease in the world may not restore it to its showroom finish. The devil lies in the original application.ceramic Floor tiles for the medical,

Nearly all tile is bonded to the subfloor with something called “thinset.” Thinset is a grey mortar-like material with adhesive properties. The worker who initially laid your tile was quite likely not an old-world craftsman,Our high risk merchant account was down for about an hour and a half, but a production dude who gets paid by the foot. When he first installed that thinset and pushed the tile into place, some of that grey gunk squeezed up between the cracks. If he were an old-world kind of guy,we supply all kinds of polished tiles, he would have carefully dug the grey gunk out, leaving a nice deep crevice between tiles in which to lay the grout. Since the preliminary “slamming” and the subsequent “scramming” were your tradesman’s prime motivators, he gave it a quick wipe, leaving just enough room in that crack to get a microscopic layer of grout inside. It looks fine for a few months, but after a little foot traffic and a few juice bomb cleanups, the grey gunk comes shining through, forevermore.

The other problem is the grout itself. If the quick-draw tile guy had read the instructions,If any food cube puzzle condition is poorer than those standards, he would have known there is a measured amount of water to be added to the grout, instead of the garden hose water-boarding technique he employed. Once said grout is mixed, it should be allowed to slake for a predetermined amount of time, then remixed. Chances are, your grout water wasn’t measured and your mixture didn’t slake. The end result is an unstable production more prone to absorbing dirt, and popping out in chunks.

Now that you’re totally depressed and ready to carpet your kitchen,Replacement China Porcelain tile and bulbs for Canada and Worldwide. let me tell you how to clean that nasty grout. Get a good grout cleaner, a stiff brush (a toothbrush is too wimpy), and get busy. Give the floor a good wet mop before and after the scrubbing.

If that sounds like too much work (it does to me), your other options are to rent a steam cleaner or hire a pro. We’ve got plenty of good ones around here, but always ask for references.

Once cleaned, consider sealing your grout. While not a license to spill, a quality sealer will keep the grout looking nice longer.

If the cleaning leaves you less than thrilled, you can try grout painting. It’s not like you have to get down on your knees with a model brush or anything. The “paint” is wiped on similar to the way grout is applied. The grout absorbs the paint and the excess is wiped away. Test a small spot to see how it looks after it dries. Like regular paint, the finished product doesn’t always resemble the swatch.

沒有留言:

張貼留言