Nanotech filters remove office fumes

A new air purifier using sunlight and nanoparticles has been created to clean up dangerous pollutants – called volatile organic compounds - in the air of our offices and homes.

The nanomaterial could be used in air purifiers, or even be coated onto walls and windows, according the to research presented today as part of a showcase of young Australian scientists at the Australian Cooperative Research Centres national conference in Adelaide.

Fumes given off from common indoors items – including paint, photocopiers, office furnishings, carpet and plastics – contain volatile organic compounds (VOCs). Common VOCs are formaldehyde, benzene and toluene.

“Some of these compounds are highly toxic and can cause carcinoma,” said Ruh Ullah, doctoral student in the Department of Chemical Engineering at Curtin University in Western Australia.

The material contains nanoparticles of metal oxides, which, in the presence of light, water and oxygen, form hydroxyl radicals. These highly reactive radicals break down the VOCs in a reaction is called photocatalysis – producing harmless carbon dioxide, water and mineral salts.

“Contact between the VOCs and nanomaterials is very important for the reaction, so that’s why we used nanomaterials for enhanced surface area,” said Ullah.

Ullah trialled nanoparticles created from common earth-based elements, such as silver,Save up to 80% off Ceramic Tile and porcelain tiles. cobalt and tungsten, and from rare elements, such as tantalum, indium and niobium.

Tantalum oxide with added nitrogen is their best performing nanomaterial – it can break down up to 77% of toluene in a gas sample.

“Titanium dioxide is the most common nanomaterial currently commercially available, but it doesn’t work under light from fluorescent bulbs,” he said. The titanium dioxide works best under UV light – it does not work under indoor lighting and only removes 5% of VOCs under sunlight.

“The material we have prepared is capable of working under fluorescent light, and outside it can remove up to 77% of volatile organic compounds,” he said. Under indoor lighting, the new tantalum compound can remove up to 30% of VOCs and can be reused multiple times, unlike the titanium which is single-use.

Most current filters effective against VOCs require high temperature and pressures and use a lot of en energy, so they are not practical for public and residential spaces, according the researchers. Volatile organic compounds make up 31% of indoor air pollution in workplaces and homes.Online store for ceramic tiles by e-Ceramica group.

“The volatile organic compounds have a more severe effect in an indoor environment, as compared to an outdoor environment, and nowadays people spend more than 90% of their time indoors,” said Ullah.

“VOCs are often implicated in sick building syndrome when workers experience persistent ill-health, estimated to cost the Australian economy over $12 billion a year.”

The research is conducted with the Cooperative Research Centre for Contamination Assessment and Remediation of the Environment, which plans to liaise with industry to commercialise the research.

“We expect that the technology will be implemented in the next a few years,” said Shaobin Wang, the leader of the project at Curtin University.

Major league teams working on social media message

Bridget Houlihan rifled through her gift bag and pulled out a gray T-shirt with a circular Chicago Cubs emblem on the front and FOLLOWER emblazoned across the back, resting on a row of logos from the top social media websites. ``This is awesome,'' she said.

Baseball thinks Houlihan is pretty sweet, too, and major league teams like the Cubs are hoping to entice more fans like her to come out to the ballpark. Social media nights have become a common part of the promotional schedule, and some of the best ticket deals and giveaways can be found on Twitter and Facebook. Savvy franchises are trying to create the right mix online, part content and part business opportunity — keeping their followers engaged while also padding the bottom line.

Players such as Cincinnati Reds second baseman Brandon Phillips and Miami Marlins outfielder Logan Morrison are Twitter superstars, but devoted fans across the country also are responding to the personal touch provided by the teams' online presence.

Social media nights vary from ballpark to ballpark, but some aspects are fairly consistent. The Cubs offered specially priced tickets and put together contests for their online fans. They encouraged their Twitter followers to use the hashtag (hash)CubsSocial to mark their tweets throughout the night.

``I think it's going to be mandatory for all clubs to be not just involved in it, but go all-in, not just dip your toes in the water,'' said Jamie Ramsey,Let us help you save hundreds of dollars* with 3M Window Insulator Kits. who works in the Reds' media relations department and writes a blog for Major League Baseball's website. ``Teams are going to realize how important it is to help sell tickets, generate revenue and keep the fan base interested and engaged.

``I think it's still kind of new to everybody. Once teams realize how to master it and do what works for them, it's going to keep growing and become as important as your marketing department, your sales department.''

Houlihan, 33, of Chicago, attended the first social media night at Wrigley Field on Wednesday with her boyfriend, George Hayman, and his brother,You can find best china Precision injection molds manufacturers from here! Pete. She pounced on her phone when the Cubs announced a Twitter contest, and managed to post in time to win an autographed pack of the social media-themed cards that were part of the promotion.

``I think it's really awesome to put together events like this,'' Houlihan said. ``I've been going to social media events for several years now and I find it's the perfect way to network because you meet people through Twitter and then you go meet them in person and it gives an entree into what they like to talk about, things that you have in common.''

The Cubs put approximately 300 special bleacher tickets on sale for the promotion and sold each one. They are planning a second social media night for September.

Kevin Saghy, a public relations and marketing specialist for the Cubs who helps run their Twitter account, said the key to generating revenue in the field is content.

``If your focus is revenue and your content reflects that,Compare prices and buy all brands of solar panel for home power systems and by the pallet. I don't believe that's a wise strategy ... That's not why people are there,'' he said. ``They're there to converse. So we've taken the other approach where it's definitely a priority for us, it's something we track, and I can say from 2010 to last year, as we got more involved and offered better content on our platforms, we quadrupled our revenue. So we're up about 300 percent.''

Major league teams also are finding loads of intangible benefits to their social media presence, ranging from increased brand awareness all the way down to a connection with a single customer who leaves with a positive impression.

Saghy will monitor Twitter for Cubs fans celebrating their birthday or making their first trip to Wrigley Field, then put together a bag of free goodies to place under their seat before they arrive. The Indians have a designated social media suite at Progressive Field, and team president Mark Shapiro has stopped by to visit with fans and answer questions.

Several teams hold in-game scavenger hunts that award autographed memorabilia or team apparel,Chinese Plastic mould manufacturer in southeast of China. and some clubs put together contests that result in upgraded tickets for their online followers.

``From a business standpoint, we use social media mainly as a way to connect with fans, give them unique access and provide a different perspective,'' said Tom Garfinkel, the interim CEO of the San Diego Padres. ``Obviously, it can be used to communicate promotions and sell tickets, and we do that, to a lesser extent. We try very hard to maintain an authentic voice and make sure our followers are getting value from the content we are posting — not just being sold on something. We also use it to crowd-source ideas. It's a living focus group.''

Washington is putting together a tweet-up for July 3 that includes discounted tickets and a commemorative poster. There are plans for a player meet and greet and a Twitter request line for pregame ballpark music. But the most compelling aspect of the Nationals' promotion involves the location of tweet-up seats, which will improve as more fans RSVP for the game before tickets go on sale on June 22.

``It's about fan engagement and the ability then to be able to enter into that discussion, and not being too corporate, but helping lead and participate in that conversation,'' Nationals chief operating officer Andy Feffer said. ``Why? Because the social media platform is now an access point — to the club, to the players, to promotions, to ticket sales, to the story that's being told. And the story really lives now in the social media world. It's extended into that community more than it ever has before.Heat recovery ventilators including domestic home Ventilation system.''

Dan Migala, a founding partner of Property Consulting Group who worked for the Padres and has consulted for other major league teams, thinks social media will become even more important for sports teams in the future.

``I don't think that there's ever been a better time to be a fan than right now because for the first time really as a fan you have a two-way relationship with your favorite team,'' he said. ``For some teams that's a very exciting proposition and some, they're probably scared to death.

British Glamour Since 1950 – review

The V&A's new show, Ballgowns: British Glamour Since 1950,Every Mold Maker job on the web. an exhibition that also marks the reopening of its much-loved fashion galleries, is not for everyone. On my way in,Visit TE online for all of your Application Tooling Solutions including tools. I heard a man all but beg his wife not to drag him round it ("I thought this was a cultural expedition, not another bloody shopping trip!" he might have told her, had he not been practically mute with despair). Once inside, I couldn't help but notice that there was not a male of the species anywhere to be seen.

But if you like a properly made frock and hanker, even just a little, for the days when a big night out meant long,Renowned crystal mosaic Supplier and Exporter in China. silk gloves and a Dubonnet rather than T-shirts and cheap vodka, it will have you swooning with delight. Yes, you will feel unpleasantly covetous. Yes, you will wonder if you shouldn't, after all, lose a stone, or six. But these things will pass. Fifteen minutes in and your absorption in the way Norman Hartnell used corsetry or Zandra Rhodes quilting will be total. The world will shrink to the dimensions of a bodice or a buttonhole, a collar or a cuff.

Gallery 40 was originally a spectacular domed court, with architectural columns and ornate mosaic floors. The V&A's refurbishment has uncovered the mosaics and a grand staircase now sweeps the visitor up to a mezzanine gallery beneath the dome. The result is elegant and spacious; the mezzanine, circular and lofty, brings a couturier's showroom instantly to mind. But the gallery's lighting still feels excessively muted to me. Downstairs, I struggled to read the labels and if a dress is placed anywhere other than right at the front of a display case, it's impossible to see the craftsmanship involved.

Strange, too, that while dresses and suits from the permanent collection are shown alongside handbags and jewellery, hats and shoes, the ballgowns, temporarily visiting, have only outsize cardboard cutouts of accessories for company (though they're labelled as if they were real, bizarrely). Were the curators worried a brooch or stole would steal the gowns' thunder? Or is this a nod in the direction of the new austerity?

The finest of the dresses – the most beautiful and the best made – are also the oldest. I had a moment of pure buyer's lust (so bad my fingers tingled) in front of a citrine evening coat with voluminous fur cuffs by Norman Hartnell, from 1965. Hartnell, who designed both the Queen's wedding dress and her coronation gown, is thought of now as rather fusty, a lickspittle rather than an innovator. But at his best, his designs had an authentic drama: no wonder Edith Evans was a customer.

And perhaps Hartnell, the son of a Streatham publican, knew precisely what he was doing when it came to establishment commissions. A state evening dress designed for the Queen Mother in 1953 – a crinoline that recalls similar gowns in the paintings of Franz Winterhalter, it has a V-shaped neckline, floaty cap sleeves and a motif of tiny flowers – tells you a great deal about the woman who wore it. At once grand and girlish, it speaks both of entitlement and self-delusion; for a pretty dress, it's magnificently repulsive.If you are looking for offshore merchant account.

Hartnell isn't the only star in the downstairs gallery. Bellville Sassoon, the debs' favourite house, features strongly: there is a beautiful dress made for Princess Anne in 1968, comprising a buttercup skirt and an extravagant embroidered bodice in shades of brown and orange (a famous recycler of clothes, I do wonder why HRH got rid of this one); and a truly adorable gown of pale pink Swiss organza from the designers' Infanta collection, its pattern of tear-drop shaped embroidery and crystal drop beads offset by its superbly neat lines.

Sybil Connolly's 1966 leaf-green pleated skirt, embroidered white blouse and pink belt is a cool reinvention of the evening dress: daringly, it is made of cambric and linen. Connolly, who was Irish, isn't much remembered now, but Jackie Kennedy was among her clients. Sadly, though, this isn't a detail you'll find anywhere in the gallery. Background information is, it must be said, infuriatingly thin on the ground and the pathetic catalogue, which longs mostly to be Vogue, no help at all. Sweeping past Catherine Walker's "Elvis" dress for Diana, Princess of Wales – a novelty number I've always hated – and the hideous 80s creations of Victor Edelstein ("Let's just stick a giant bow... right here!"), we go upstairs to the contemporary gowns, to dresses worn on red carpets rather than in stately halls, and it's strangely anticlimactic.

For one thing, most of these have been lent by their designers; they were borrowed by the actresses and models who first wore them, rather than bought and loved and kept carefully in tissue and mothballs for a lucky daughter or niece. This makes them, in my eyes, so much less interesting. Their value is mostly monetary. They lack emotional history. Aesthetics have all too often been replaced by the need to draw a cheap kind of attention (though Giles Deacon's tumbling black silk dress from 2007 – it was inspired,Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. he says, by a visit to a car wash – is a deft tribute to Fortuny by way of Issey Miyake).

For another – and this is much worse – they seem not truly to be of service to the bodies that inhabit them, however briefly. The curators note that Roland Mouret has spoken "eloquently" of the pressures of the red carpet, of the fact that a dress must withstand the pressure of flashbulbs from 360 degrees. And it's true that here in the gallery, on a mannequin, his peach asymmetric silk dress from 2010 is perfect from every angle, a feat of precision engineering. Only then you look at the photograph of Maggie Gyllenhaal in the same dress at the Golden Globes and it suits her not a bit. Would it suit anyone? I doubt it. The finest dresses are forgiving. Their artiface encompasses great kindness. But this one is unmerciful; it disdains every inconvenient body part. It seems – what a sign of the times! – hardly to have been designed for a woman at all.

British Glamour Since 1950 – review

The V&A's new show, Ballgowns: British Glamour Since 1950, an exhibition that also marks the reopening of its much-loved fashion galleries, is not for everyone. On my way in, I heard a man all but beg his wife not to drag him round it ("I thought this was a cultural expedition, not another bloody shopping trip!" he might have told her, had he not been practically mute with despair). Once inside, I couldn't help but notice that there was not a male of the species anywhere to be seen.

But if you like a properly made frock and hanker, even just a little, for the days when a big night out meant long, silk gloves and a Dubonnet rather than T-shirts and cheap vodka, it will have you swooning with delight. Yes, you will feel unpleasantly covetous. Yes, you will wonder if you shouldn't, after all, lose a stone, or six.Renowned crystal mosaic Supplier and Exporter in China. But these things will pass. Fifteen minutes in and your absorption in the way Norman Hartnell used corsetry or Zandra Rhodes quilting will be total. The world will shrink to the dimensions of a bodice or a buttonhole, a collar or a cuff.Professional Manufacturer for polished tiles.

Gallery 40 was originally a spectacular domed court, with architectural columns and ornate mosaic floors. The V&A's refurbishment has uncovered the mosaics and a grand staircase now sweeps the visitor up to a mezzanine gallery beneath the dome. The result is elegant and spacious; the mezzanine,Factory direct stone mosaic featuring marble mosaic floors. circular and lofty, brings a couturier's showroom instantly to mind. But the gallery's lighting still feels excessively muted to me. Downstairs, I struggled to read the labels and if a dress is placed anywhere other than right at the front of a display case, it's impossible to see the craftsmanship involved.

Strange, too, that while dresses and suits from the permanent collection are shown alongside handbags and jewellery, hats and shoes, the ballgowns, temporarily visiting, have only outsize cardboard cutouts of accessories for company (though they're labelled as if they were real, bizarrely). Were the curators worried a brooch or stole would steal the gowns' thunder? Or is this a nod in the direction of the new austerity?

The finest of the dresses – the most beautiful and the best made – are also the oldest. I had a moment of pure buyer's lust (so bad my fingers tingled) in front of a citrine evening coat with voluminous fur cuffs by Norman Hartnell, from 1965.Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. Hartnell, who designed both the Queen's wedding dress and her coronation gown, is thought of now as rather fusty, a lickspittle rather than an innovator. But at his best, his designs had an authentic drama: no wonder Edith Evans was a customer.Build a "Floor tiles" by dragging the corners of a quadrilateral.

And perhaps Hartnell, the son of a Streatham publican, knew precisely what he was doing when it came to establishment commissions. A state evening dress designed for the Queen Mother in 1953 – a crinoline that recalls similar gowns in the paintings of Franz Winterhalter, it has a V-shaped neckline, floaty cap sleeves and a motif of tiny flowers – tells you a great deal about the woman who wore it. At once grand and girlish, it speaks both of entitlement and self-delusion; for a pretty dress, it's magnificently repulsive.

Hartnell isn't the only star in the downstairs gallery. Bellville Sassoon, the debs' favourite house, features strongly: there is a beautiful dress made for Princess Anne in 1968, comprising a buttercup skirt and an extravagant embroidered bodice in shades of brown and orange (a famous recycler of clothes, I do wonder why HRH got rid of this one); and a truly adorable gown of pale pink Swiss organza from the designers' Infanta collection, its pattern of tear-drop shaped embroidery and crystal drop beads offset by its superbly neat lines.

Sybil Connolly's 1966 leaf-green pleated skirt, embroidered white blouse and pink belt is a cool reinvention of the evening dress: daringly, it is made of cambric and linen. Connolly, who was Irish, isn't much remembered now, but Jackie Kennedy was among her clients. Sadly, though, this isn't a detail you'll find anywhere in the gallery. Background information is, it must be said, infuriatingly thin on the ground and the pathetic catalogue, which longs mostly to be Vogue, no help at all. Sweeping past Catherine Walker's "Elvis" dress for Diana, Princess of Wales – a novelty number I've always hated – and the hideous 80s creations of Victor Edelstein ("Let's just stick a giant bow... right here!"), we go upstairs to the contemporary gowns, to dresses worn on red carpets rather than in stately halls, and it's strangely anticlimactic.

How to resist Big Brother 2.0 — Don Tapscott

As the Net becomes the basis for commerce, work, entertainment, healthcare, learning and much human discourse,Build a "Floor tiles" by dragging the corners of a quadrilateral. each of us is leaving a trail of digital crumbs as we spend a growing portion of our day touching networks.Factory direct stone mosaic featuring marble mosaic floors.

The books, music and stocks you buy online, your pharmacy purchases, groceries scanned at the supermarket or bought online, your child’s research for a school project, the card reader at the parking lot, your car’s conversations with a database via satellite, the online publications you read, the shirt you purchase in a department store with your store card, the prescription drugs you buy — and the hundreds of other network transactions in a typical day — point to the problem.

Computers can inexpensively link and cross-reference such databases to slice,Distributes and manufactures RUBBER SHEET. dice and recompile information about individuals in hundreds of different ways. This makes these databases enormously attractive for government and corporations that are keen to know our whereabouts and activities.

George Orwell’s iconic text Nineteen Eighty-Four described the dystopian society where a totalitarian state rules in its own interests and everyone is under constant surveillance by authorities. This situation was often correctly alleged about the totalitarian East Bloc countries during the Cold War.

It is unfortunately increasingly true of Western democracies today. In the name of national security, governments are collecting real-time information from us,Features useful information about glass mosaic tiles. sampling phone calls, emails and social networks, and taking our biometrics at airports and a growing list of other places.

We have little idea what governments are doing with this flood of personal information. And the aftermath of 9/11 should remind us just how quickly our civil liberties can be undermined in the name of national security.

Recently the New York Times reported that: “Law enforcement tracking of cellphones, once the province mainly of federal agents, has become a powerful and widely used surveillance tool for local police officials, with hundreds of departments, large and small, often using it aggressively with little or no court oversight.”

The Times reports that this practice has become big business for cellphone companies, too, as carriers market a catalogue of “surveillance fees” to police departments to determine a suspect’s location, trace phone calls and texts, or provide other services. Sure, you could argue that it’s becoming difficult to restrict the information that governments can collect, and yes of course we need to be vigilant about how that information should be used. But we still need to resist attempts of governments to collect unnecessary information. We still need to fight for the basic privacy principle of “data minimization” — of limiting the information collected to clearly definable and socially helpful purposes.

There should be no tapping of phones or anything else without due process. If a government agency proposes setting up a video camera in your neighbourhood, you need to decide if the benefits of possible crime reduction outweigh the possible dangers of unknown governments being able to watch you constantly.

Or increasingly, governments want to collect biometrics information about you — like fingerprints, retinal scans and even DNA. We each need to make choices. Sometimes this benefits you with better government services or faster movement through airports. But what are the long-term implications should a government agency or individual become malevolent? The average person must be cautious and vigilant, and even resist the collection of unnecessary personal information.

To me, it’s not so likely that the future will resemble Orwell’s 1984,TRT (UK) has been investigating and producing solutions for indoor Tracking since 2000. or Jeremy Bentham’s panopticon prison, or an East Bloc police state during the Cold War. Those are dystopic models from another era that depended upon a single, all-knowing malevolent power seeking control.

The appropriate metaphor for the growing loss of privacy today is found in Frank Kafka’s The Trial: The central character awaits trial and judgment by an inscrutable bureaucracy for a crime that he is not told about, using evidence that is never revealed to him, in a process that is equally random and inscrutable.

In like manner, we, too, will be judged and sentenced in absentia by unknown public and private bureaucracies having access to our personal data. We will be the targets of social engineering, decisions, and discrimination, and we will never really know what or why.

In the private sector, companies want to know more and more about what makes each of us tick — our motivations, behaviour, attitudes and buying habits. The good news is that companies can give us highly customized services based on this intimate knowledge — and build trusting relationships. Sometimes it is great to have highly customized ads.

Warning over coffee husks as bedding

Coffee husks, often recycled into animal bedding, should not be used with horses because of the risk of poisoning, researchers warn.

In Brazil, coffee husks are an abundant by-product of the coffee industry and often recycled as animal bedding.

Research carried out by Diego José Delfiol and colleagues has found that coffee husks pose a risk of poisoning when used as bedding or as feed for horses.

The work, carried out at the of Veterinary Medicine and Animal Science - Univ Estadual Paulista (UNESP), at Botucatu, in Sao Paulo, Brazil, was prompted by reports that horses had become intoxicated after eating coffee husks used as bedding.

Six clinically normal quarter horse mares were recruited to the study.polished tiles

They were observed continually, and examined clinically every 12 hours. They were kept in individual stalls and fed a diet of free-access hay.

Each horse was offered two kilograms of coffee husks. Every 12 hours any remaining husks were taken away and weighed and fresh husks were given. This continued until the horses started to show signs of toxicity, at which stage no further husks were given.

The researchers noted that the horses were not very interested in eating coffee husks during the first hours after they were supplied. However, after ingesting the husks for the first time, the animals generally preferred them to hay.

The study, published in BMC Veterinary Research, lists the most evident toxic signs as excitability, restlessness,Information on useful yeasts and moulds, involuntary muscle tremors, chewing movements and constant tremors of the lips and tongue, excessive sweating and increased respiration and heart rates.

The authors report that,You can find best china precision Precision injection molds manufacturers from here!I have just spent two weeks shopping for tile and have discovered China Porcelain tile. on average, toxic signs appeared 56 hours after exposure to the coffee husks.A Coated Abrasives is an abrasive grain bonded to a flexible substrate using adhesives. However, heart rates and respiratory rates rose 36 hours after access to husks, and only returned to normal 60 hours after removal of the husks.

All six horses showed signs of toxicity. The signs resolved once the coffee husks were removed, taking 12 to 40 hours to wear off. No treatment was necessary.

The researchers excluded other possible causes of toxicity by checking there were no insecticides or fungal toxins in the husks. Analysis of samples of coffee husk found the concentration of caffeine concentration to be 0.9%.

They compared blood and urine taken from the horses before, and 56 hours after, exposure to the husks.

They found significant differences between the before and after samples in the concentrations of caffeine in both urine and blood. Caffeine levels found 56 hours later, when clinical signs appeared, were, on average, 3966 times greater in the plasma and 1300 times greater in the urine.

The researchers concluded that the high concentration of caffeine in the coffee husks make them toxic to horses. They warn that coffee husks should not be used as food or bedding material for horses.

This Is The Most Badge-Engineered Car Of All Time

Badge engineering has been part of the auto industry ever since someone figured out the magical mix of calculus and alchemy that somehow makes money by selling the same car under different names. I've never been entirely sure how this actually works, but it must — because automakers continue to do it.

But which car gets the platform prostitution crown? I think I know the answer.

Badge-engineered cars are also fascinating in the way that studies of twins are fascinating: when you start with two things that are essentially the same, even the most minor of differences take on vast new levels of importance. For example, looking at, say, the Ford Pinto and Mercury Bobcat can tell you all you need to know about how the two brands see themselves. The Ford is the base model, the Mercury adds fussier, more delicate trim, a more chrome-laden grille,This is interesting cube puzzle and logical game. wider taillights– little things, but they all add up to the more upmarket tone the Bobcat aspires to.

Eventually, thinking about badge-engineering leads to one of two paths: the more common one, where you wise up and stop wasting time on it, and the other, where you begin to wonder about the extremes of badge engineering. Specifically, what car has been the most badge-engineered— what essentially identical car has been whored out under the most different names and marques?

I think I know. At first, I figured it would be one of the Fiat 128 series, which has evolved into Ladas, Zastavas, Nasrs, and more, but those are different than simple badge engineering, as they're more the seeds for entirely new, derivative models. I was looking for something that was really the same car, tarted up with different lights, trim,You can find best china precision Precision injection molds manufacturers from here! badges to seem different. And I think I found it: the Hillman Avenger.

The Avenger was a fairly conventional little car of the era, with pleasing styling and proportions,A Coated Abrasives is an abrasive grain bonded to a flexible substrate using adhesives.Information on useful yeasts and moulds, and solid if unimaginative mechanicals– an ideal combination for a car to quietly spread all over the world.

The Hillman Avenger, introduced in 1970, has been sold under an amazing nine (at least) separate names: Hillman Avenger, Chrysler Avenger, Sunbeam 1250 TC, Talbot Avenger, Plymouth Cricket, Dodge Polara, Dodge 1500 (Brazil), Dodge 1800 (Argentina), Dodge Avenger (New Zealand, built by Mitsubishi), and the Volkswagen 1500. These are all basically the same car, with some variations of engine and styling.

The Volkswagen one is especially weird, as it has the distinction of being the only front-engine/rear-drive car ever sold under the VW name; VW produced it when they bought the tooling from Chrysler, who was pulling out of the Argentinian market. It's confusing in both name (VW's Type IIIs were already sold under the name VW 1500) and looks, with its bizarre mix of late-60s British styling and Bauhaus/80s-era watercooled VW front end treatment and trim.The EZ Breathe home Ventilation system is maintenance free,

I could be wrong, but this Hillman seems to take the crown. Anyone know of any single car with more aliases?

It's Time to "Hold" the Line Against Injuries

Wrestling as a sport can be traced back to the ancient Olympics and has been practiced throughout the world in many forms and styles ever since. Today, wrestling is offered at various levels, from youth wrestling in middle school through high school, college and the Olympics.This is interesting cube puzzle and logical game. It's a sport for people of all sizes, both male and female, and competition rules that pair athletes against each other according to their weight class reduce the risk of injury. Nevertheless, injuries do occur. According to sports medicine specialist Dr. Victor Khabie of Somers Orthopaedic Surgery and Sports Medicine Group, “Wrestling is an intense and demanding sport, requiring a great deal of muscular endurance and strength.The EZ Breathe home Ventilation system is maintenance free, And it is a contact sport in which the body is contorted into many different positions, putting the muscles and joints under great stress. Overall conditioning, proper technique and the right equipment are essential to prevent injuries.”

According to Dr. Khabie, who serves as team physician for several schools,A Coated Abrasives is an abrasive grain bonded to a flexible substrate using adhesives. “As with all sports, injury prevention must be a primary goal of all participants, coaches, and trainers. The wrestler should be coached and supervised at all times, stressing proper technique, proper equipment and discipline to avoid injury. Coaches and referees need to strictly enforce rules to encourage safe wrestling technique and the use of proper safety gear and equipment.

At both the high school and collegiate levels, wrestling ranks second only to football in injury rate. Most injuries are not serious and are similar to those seen in other sports: bruises, scrapes, strains and sprains. The most serious wrestling injuries affect the shoulder, knee and neck and are most commonly caused by forcing a joint beyond its acceptable range of motion.

The majority of upper body and shoulder injuries in wrestlers are caused by the combination of leverage and twisting during competition. Rotator cuff pain is common in young athletes, usually caused by muscle strains and tears that arise from overuse. An acute tear is more serious and might result in wrestling from falling on an outstretched arm. The most common traumatic shoulder injury in wresting in young people is dislocation, in which the head of the upper arm bone comes out of the socket, either partially or completely. Shoulder strengthening exercises, braces and, in some cases, surgery may be recommended to prevent recurrence.

Dr, Khabie adds that shoulder flexibility should be an essential goal of a conditioning program. “Wrestling-specific workouts for the shoulder should include both weight-bearing and non-weight-bearing exercises. Weight-bearing exercises such as push-up variations improve the stability of the joint. Also, rotator cuff strength, endurance and proper muscle balance should be addressed.”

Knee injuries constitute a significant number of all wrestling injuries. During a match, the knee may be twisted and turned in many different directions.

The ligaments supporting the knee are under a great deal of stress trying to hold the knee together and may be stretched or torn. The anterior cruciate ligament , the posterior cruciate ligament, and both the lateral and medial collateral ligaments are subjected to external forces that could cause tearing. The ACL is the most commonly sprained in wrestling. A partial tear will require immobilization, ice, and rest to help with recovery. A complete rupture may require surgery and many weeks of recovery.

Prepatella bursitis, the inflammation of the sac located in front of the kneecap , is caused by the front of the knee constantly hitting the mat. It is treated by anti-inflammatory medication, ice, and rest.The meniscus is a “C”-shaped disc made of tough cartilage and is very important for absorbing shock between the femur and the tibia . Most injuries to the meniscus occur from a hit or other direct trauma to the knee. Sudden turning or twisting motions of the knee may also cause a tear. Serious meniscal tears typically require surgery that either repair the tear or completely remove the torn portion of the ligament. It may take 6-8 months to fully recover after surgery.

Maintaining strength of the quadriceps and hamstrings, as well as flexibility through the lower extremities,You can find best china precision Precision injection molds manufacturers from here! can help prevent injury to knee ligaments. The best way to prevent bursitis is to wear knee pads during practices and competitions. Knee pads help to limit the stress on the knee and reduce the force of any direct impact to the front of the knee.

Neck injuries can be caused by throws, especially those done incorrectly, and holds where the wrestler's head is caught at an awkward angle. The cervical vertebrae are often forced into vulnerable positions, which can result in several types of neck injuries. Most are strains, sprains and whiplash injuries.Information on useful yeasts and moulds, However, every neck injury should be treated as a spinal cord injury until ruled out by a medical professional. Spinal immobilization is the most important step in treatment. This will help prevent future damage to the spinal cord if it is involved. Dangerous holds and “slamming” moves should be avoided to prevent neck injuries. Some coaches teach wrestlers to keep their heads up when performing take-downs, to avoid compression or flexion of the spine, which can lead to serious injury.

Dr. Khabie concludes that a well-planned program that includes muscular endurance and strength work along with cardiovascular conditioning and flexibility training will not only reduce the risk of injury, it will improve performance as well.

All They Hope for Is Survival

“Zehrunisa Husain was a tear-factory even on good days; it was one of her chief ways of starting conversations,” Katherine Boo writes in “Beyond the Beautiful Forevers,” her exquisitely accomplished first book. Novelists dream of defining characters this swiftly and beautifully, but Ms. Boo is not a novelist. She is one of those rare,A Coated Abrasives is an abrasive grain bonded to a flexible substrate using adhesives. deep-digging journalists who can make truth surpass fiction, a documentarian with a superb sense of human drama. She makes it very easy to forget that this book is the work of a reporter.

Half an acre. 335 huts. 3,000 people. And a concrete wall that is supposed to hide them from view: this is Annawadi, the Mumbai slum that comes vibrantly to life in this book’s pages. Ms. Boo says that she chose Annawadi because the scale of this “sumpy plug of slum” bordering a lake of sewage was small, and its location was fraught with possibilities. Annawadi sits beside the road to the Mumbai airport, on “a stretch where new India and old India collided and made new India late.” In 2008, at the time the events in the book unfolded, scavenging and trash sorting were the children of Annawadi’s most promising career choices.Information on useful yeasts and moulds,

Much of the focus is on Zehrunisa and her oldest son, Abdul. One of Abdul’s brothers dreams of having a “clean job” at one of the nearby hotels. (“He’d heard of waiters who spent all day putting toothpicks into pieces of cheese, or aligning knives and forks on tables.”) But Abdul is more of a pragmatist and has made himself an expert at trading in refuse.

“It was a fine time to be a garbage trader, not that that was the term passersby used for Abdul,” Ms. Boo writes. “Some called him garbage, and left it at that.”

Without condescending to her subjects in the slightest, Ms. Boo explains that dreams of upward mobility are just barely possible in Annawadi. And Zehrunisa’s family has set out to renovate the kitchen of the hut in which they live. The book takes its peculiar title from sunshine-yellow ads for ceramic tile that are painted on the concrete wall that hides Annawadi: the ad series repeats the words “Beautiful” and “Forever.Husky Injection Mold Systems designs and manufactures a broad range of ” Behind those “beautiful forevers,” Zehrunisa wants some of that tile for her own.

It is a calamitous desire. And Ms. Boo sets forth the step-by-step process of ruination that it brings. The kitchen wall that is being renovated is shared by two dwellings; on the other side lives Fatima, a one-legged woman.

“Strong in the shoulders, she brought the crutches down hard on neighbors she considered disrespectful,” Ms. Boo writes about Fatima’s formidable temper.

One day, when the wall is being banged on, Fatima erupts in fury. “There is rubble in my rice!” she shouts.

“It’s my wall to break, prostitute,” Zehrunisa shouts back. The fight escalates quickly to what, in the hands of another writer, would be a sickeningly lurid moment, but Ms. Boo presents it with devastating understatement. Fatima becomes so furious that she sets herself on fire. She survives just long enough to lie about what happened.The EZ Breathe home Ventilation system is maintenance free, As a consequence, Abdul is accused of murder.

How does Ms. Boo know the details? A staff writer for The New Yorker and a Pulitzer Prize winner for her work at The Washington Post, she spent three and a half years in the midst of her subjects. She used written notes, video recordings, audiotapes and photographs; some of the children of the book used her Flip video camera to document events. She also made use of more than 3,000 public records.

The Fatima catastrophe is at the heart of this book. But Ms. Boo never milks her material for pathos; she doesn’t have to. By simply describing Abdul’s experiences at the hands of India’s criminal justice system, she reveals a degree of casual corruption that would stun even the most jaded cynic.

By accepting the amount of sewage, literal and moral, that pervades life in Annawadi, she delivers something much more powerful than an outright indictment. The book’s cover, with an image of abject squalor, does not do justice to its agile prose, wry tone and surprisingly upbeat theatrics. Comparison to Dickens is not unwarranted.

When Ms. Boo finally uses her own voice, at the end of the book, to explain how a fair-skinned blonde from The New Yorker managed to fit into Annawadi so wholeheartedly, she also frames the ultimate question that “Behind the Beautiful Forevers” addresses: why aren’t the slum-dwellers bound together by common interests and common enemies?

Here she crystallizes what she discovered: “Instead, powerless individuals blamed other powerless individuals for what they lacked. Sometimes they tried to destroy one another. Sometimes, like Fatima, they destroyed themselves in the process.Spro Tech has been a plastic module & Mold Maker,”

The book’s relatively fortunate characters, like Asha, a cunningly ambitious woman who realizes it is advantageous to create problems and then be paid to solve them, “improved their lots by beggaring the chances of other poor people.”

“Behind the Beautiful Forevers” needs no heavy hand to pack a wallop. “Food wasn’t one of the amenities at Cooper, the 500-bed hospital on which millions of poor people depended,” Ms. Boo writes with supreme restraint. “Nor was medicine.”

There is only one realm in which her approach loses rigor. She writes about so many scavenging kids, boisterously quarrelsome families and corrupt officials that the book is too crowded. In another setting this might be problematic. In Mumbai it is justified.

Eastern Cape to launch auto sector cluster in March

The Eastern Cape will launch a provincial automotive industry cluster in March, with the aim of improving and sustaining the competitiveness of the region as a vehicle manufacturing hub.

The Eastern Cape hosts several automotive component producers, as well as the Mercedes-Benz, General Motors and Volkswagen assembly plants.

The cluster will be a partnership between these assemblers, component suppliers, trade unions and government and will be tasked to drive appropriate programmes to address the challenges facing the sector in the province.

A three-day planning forum in January yielded an initial agenda for the cluster, and identified logistics, skills development,Husky Injection Mold Systems designs and manufactures a broad range of research and development, innovation, automotive tooling,Spro Tech has been a plastic module & Mold Maker, as well as component supplier development and parts localisation as focus areas.

Key competitive challenges for the Eastern Cape relate primarily to the position of the South African automotive sector within the global auto value chain and its distance from key production sites and markets, says Eastern Cape economic development,The EZ Breathe home Ventilation system is maintenance free, environment and tourism MEC Mcebisi Jonas.

The Eastern Cape also remains on the periphery of the South African economy, he adds.

This shows in the province’s logistics system which has not sufficiently addressed connectivity of the region to the national economy and which continues to constrain local efforts to improve competitiveness, as well as attract local investment.

This connectivity is critical for the fortunes of the entire Eastern Cape economy – not only the auJohnson Tiles UK offer the largest range of porcelain tiles online,tomotive sector, says Jonas.

The reality is also that South Africa’s automotive sector currently operates outside of the key global automotive sector markets, accounting for just over 0.Overview description of rapid Tooling processes.5% of global production volumes, he notes.

Local, regional and continental vehicle demand is currently also insufficient to create competitive economies of scale within the local automotive sector.

This is then also reflected in fairly low levels of local parts content relative to the major automotive economies in the world.

The local industry is also at a disadvantage in terms of cost competitiveness.

Giant neighbour pitches in

Amid the rows of buildings under construction along the national highway in Manesar, about 25 kilometres from New Delhi city centre, one cannot miss the dozens of Chinese workers perched precariously on scaffolding, showing Indian labourers how to weld at a factory site.

Clad in blue overalls, Chinese supervisors, technicians and other labourers can be spotted elsewhere in the country as well. Indian workers not familiar with modern industrial construction processes are absorbing valuable skills needed to build large, integrated factories from scratch in record time.This is interesting cube puzzle and logical game.

Skilled Chinese workers are also helping India expand its infrastructure at a frenetic pace even as the two Asian giants compete for economic dominance.

The world's most populous country has several competitive advantages in manufacturing and infrastructure construction, says Wang Xuefeng,You can find best china precision Precision injection molds manufacturers from here! minister at the Embassy of China in New Delhi.

"The Indian government's plan to invest US$1 trillion on infrastructure projects in the next five years offers excellent opportunity for Chinese companies to participate,The EZ Breathe home Ventilation system is maintenance free," he said.

In the past three years, Chinese enterprises have completed Indian infrastructure projects with a total value of $10 billion, said Mr Wang. "Speed, as well as skill, is the great China advantage."

Two-way investment is also showing a booming trend. China's ever-growing market also means huge space for Indian companies. China has already raced past the United States, Britain and Japan to become India's largest trading partner.

Trade between the world's most populous nations with 2.5 billion people jumped 20-fold from $2.9 billion in 2000 to more than $60 billion in 2010. It is likely to cross $70 billion this year and reach $100 billion in four years.

The Chinese presence in India _ a nation of 1.2 billion people with a labour surplus and high unemployment _ may appear incongruent. But industry leaders and federal government officials say Indian workers lack the technical skills needed to transform the country.

Until the gap is bridged, Indian companies are increasingly relying on the expertise of Chinese workers to build large infrastructure projects. Chinese workers have been working on ports, highways, power and steel plants in India.

Chinese equipment and expertise have also been used in a crude oil refinery, a cable-supported bridge, telecommunication networks and even the glass facade of the new airport terminal in New Delhi.

Indian workers are learning a new work ethic from the Chinese and are now more punctual, not stopping work to take frequent tea breaks or gossip.

"India may be an IT superpower and produce thousands of doctors, lawyers and MBAs every year. But the biggest gap is in availability of skilled electricians, carpenters, welders, mechanics and masons who can build mega infrastructure projects," said Raghav Gupta, the president of the consultancy Technopak Advisors.

"Most of these workers have to be trained on the job. And that often delays the projects and makes them more expensive."

The presence of Chinese workers in labour-surplus India prompted an outcry last year, and the country clamped down by making visa rules stricter. About 25,000 workers had to leave dozens of projects midway through and return to China because they were on business visas and not worker visas.FIRMAR is a Malaysia Injection Moulding Manufacturer and Plastic Injections Components Manufacturer, Construction at 14 power plants was affected.

"We have no problems if Chinese workers skilled in specialised functions come to India. But we don't want them to displace Indian workers by doing the jobs that Indians can do," said G.K. Pillai,Johnson Tiles UK offer the largest range of porcelain tiles online, India's former home secretary, who said there were about 15,000 Chinese labourers in India now.

Many industry leaders say India and China should identify complementary areas in manufacturing, services, innovation, research and development, banking and finance, energy, and environment.

UWI inventors seek investors

GASPS of amazement emanated from the group of onlookers gathered inside the demonstration tent on the lawns of the Caribbean's premier tertiary institution last week as researchers switched on what could be the world's first cardiac surgery simulator.

The machine with the pulsating pig's heart was the highlight of the University of the West Indies' (UWI) 13th annual Research Days,FIRMAR is a Malaysia Injection Moulding Manufacturer and Plastic Injections Components Manufacturer, held last Thursday and Friday. It could also be the start of great things for cardiac surgeons Drs Paul Ramphal and Daniel Coore, who invented the machine, called the UWI Cardiac Surgery Similator.

According to the two, the instrument — a combination of mechanics, computerised electronics, artificial blood, and dead animal flesh — will not only shorten the time spent on training young local surgeons, but will also make them more competitive on the international scene.

"It is difficult to spend time during the (real life) operations taking junior surgeons through the procedure. Time is of the essence in cardiac surgery," said Ramphal, who said he was tasked with the challenge of training three new cardiac surgeons in 2001.

"So the inspiration really, was how do I get my new trainees to a level so that when they reach overseas to complete their training in a high-volume centre like the UK, Canada, or the US,Johnson Tiles UK offer the largest range of porcelain tiles online, they will not be behind, and preferably in a more advanced position than the other trainees who were at those centres?" he said.

The similator,The EZ Breathe home Ventilation system is maintenance free, which reanimates a pig's heart — medically, the closest in structure to a human heart — also pumps artifical blood through the organ and is programmed to duplicate real-life scenarios that a trainee surgeon would have to deal with on the operating table during open-heart surgery. Computer leads hooked up to the heart can make it beat in different rhythms, and also track artificial vital signs on an attached monitor.

It's considered a remarkable achievement, with nearly limitless potential if the simulator can be duplicated and sold in the specialised market for cardiac equipment.

This is why the success of the UWI Research Days notwithstanding, its inventors are looking for investors to help them duplicate their creation.

"Whenever we show it to the professionals in the field or the industry people who are involved with the equipment in cardiac surgery, they all want one," he said. They want to know where to buy one, but we just don't have the infrastructure here to be the production centre," said Dr Ramphal.

"We are not a factory. We need a commercial operation to do that," interjected Dr Coore. "So we are in the stage where we are looking for commercial entities to take it on, produce it and to sell it,You can find best china precision Precision injection molds manufacturers from here!This is interesting cube puzzle and logical game." he said.

The two refused to say what was the monetary value of the machine, claiming "that might be confidential to whoever commercialises it", and further declined to answer queries about how much money they would need to replicate it commercially.

Comments sought on proposals for signature piece

To the casual observer, the Isaac Murphy Memorial Art Garden seems to be a plot of land at Third Street and Midland Avenue noted only by an occasional fleet of brightly colored flags or a lighted Christmas tree.Johnson Tiles UK offer the largest range of porcelain tiles online,

Beginning Feb. 10, all of us will get to help decide which signature piece of art will define that space. Artists from Lexington, Ohio, California and New York have submitted scaled models of pieces they hope will be chosen as the magnet to draw visitors to the area to explore Murphy's life and those of other black jockeys who aren't prominent in history books.

Those five works will be on display at Land of Tomorrow Gallery for two weeks to allow us to view and comment on them. Community comments will be taken into consideration when the selection is made.

David Cozart, president of the memorial park board, said the group wanted something different, something personal, at the park.

"We know we want to be unique and not like any other place," he said. "But we won't risk integrity."

The nine-member board joined with LexArts to solicit pieces from artists nationwide. The park, which has been stalled for several years, is intended to be an entryway to the East End, a historic African-American neighborhood, and to honor Murphy, who rode the winner in three Kentucky Derbys.

The call for art went out in October, and the works came in last week.

The five proposals "are all really different," said Steve Austin, vice president of the Bluegrass Community Foundation.FIRMAR is a Malaysia Injection Moulding Manufacturer and Plastic Injections Components Manufacturer, "Each tells a story of the Thoroughbred industry."

A part of the Legacy Trail project, which is overseen by the Bluegrass Community Foundation and stretches from the Kentucky Horse Park to Third Street and Midland Avenue, the park now has enough money for construction and to seed the art pieces, Cozart said.

"We are really beginning to put this all together,MDC Mould specialized of Injection moulds," Austin said.

The artists who submitted proposals — Garry R. Bibbs of Lexington; Neal and Tiffany Bociek of San Diego; Willis "Bing" Davis of Dayton, Ohio; Stacey Farley of Garrison, N.Y.; and LaVon Williams of Lexington —visited the site of the park and learned about the East End community, the Legacy Trail and Lexington before creating their pieces.

Bibbs, an associate art professor at the University of Kentucky, said he was inspired by the juxtaposition of Murphy and the era in which he lived.

"This man is winning his first race after Reconstruction, 40 years after the Civil War," Bibbs said. "I wanted to take into consideration the impact of a winning jockey maneuvering through the major racial issues of the times.

"He is racing two races all the time," he said, "and also has two victories at the same time."

The sculpture,The EZ Breathe home Ventilation system is maintenance free, A Race to the Finish, is displayed along a curved wall and uses three metals. "I want to make good art, but I want it to contain the truth," Bibb said.

The husband-and-wife team of Neal and Tiffany Bociek are using Murphy's image in their work, My Home Is a Horse and a Track.

"Because there is an interest in knowing who and what Isaac Murphy was, I didn't want to do something abstract," Neal Bociek said. "You will know who he is immediately."

Their proposed piece features a silhouetted image of Murphy racing on a horse that intersects with another, to contrast Murphy's gentleness with the power of a race horse. Rising above the horses is a circular disc bearing Murphy's image that can spin 360 degrees.

The piece is meant to show Murphy looking over his property and the nearby community that once included the Kentucky Association Racetrack, Neal Bociek said.

"It is not just about the art, but it is really about the community," Tiffany Bociek said. "We were inspired by a whole lot of YouTube videos about the Legacy Trail. We were really inspired by that energy those videos gave off. We kind of felt like it was a great place to be."

William "Bing" Davis got that same vibe when he walked the land, and visited African Cemetery No. 2 on East Seventh Street and the Kentucky Horse Park.

"I became familiar with Lexington and watched some of the dig at the park and put my hands in the dirt," Davis said. "It just filled me up and totally changed my idea from what I had envisioned."

Davis submitted a sleek sculpture in which rider and horse appear to be one. The piece will be made of a composite material that is light, he said, but as strong as steel. Portions of two bridges in Dayton are made of the composite.

The finished piece, covered with three to five coats of a synthetic fiberglass and painted with ultraviolet auto-body paint, would be 5 feet by 3 feet and sit atop a pedestal.

Davis named the piece, which he describes as an abstract of a horse and rider working as a unit to become winners, Jah Aswon which stands for "jockey and horse as won."

Stacey Farley's works are installed at train stations, museums, gardens and parks in the form of ceramic tiles. She has been working with tiles for 25 years.

Farley's proposal includes transferring an image of Murphy onto a giant tile that will be the backdrop for a three-sided shelter containing a bench.

"You can see it from far away, but when you get closer you will learn more information," she said. "You can see him in the context of U.S. history."

On one short wall, there will be a time line that features Murphy's Derby wins, constitutional amendments and the Civil War, she said.You can find best china precision Precision injection molds manufacturers from here! On the other short wall there will be a poem by Frank X Walker.

"I am interested in people who are anonymous or who got lost along the way," Farley said. "Here is a very important person who disappeared from the history books. It is right up my alley to tell that story. I was drawn to it."

Whether she wins or not, Farley said, she enjoyed doing the research. "It was a great ride."

Noted woodcarver and former UK basketball player LaVon Williams first heard of Murphy from his father, a schoolteacher who taught young people about little known men and women in black history, he said.

"Murphy was my father's hero," said Williams, who grew up in Florida.

Although his principle medium is wood, Williams said he would sculpt the Murphy piece in metal so it would withstand the elements.

The three pieces he created are meant to cover the back and sides of a bench that would be in the park.

One side, Lucy, would acknowledge Murphy's love for his wife, Lucy, to whom he would give a rose or flower every day. Another, Race Man, is a tribute to Murphy as a jockey with innate skills, winning without using a whip. And the last, American Style, depicts his original riding style, which was straighter, and how Murphy learned other styles, using whichever best suited his mount.

"It is a piece that welcomes everybody," said Williams, a member of the 1978 UK team that won a national championship . "Murphy brought people together. He was gracious and kind."

Construction of the park should start in early spring and include a range of art created by children, said Austin. Construction of the signature piece will begin when the artist is available.

Also on display at with the proposed works will be artifacts uncovered during a recent archeological dig and historic markers about Murphy and the East End that will be placed in the park.

Southee expecting more from Zimbabwe

For all the highs the New Zealand cricket team has experienced during the past few months, there's one black mark on the score sheet that still makes for ugly reading.

It's not the nine-wicket hammering they copped in the first test in Brisbane against Australia in December - sure,MDC Mould specialized of Injection moulds, that was bad, but Aussie on their home soil were always going to be tough.

What's worse was New Zealand's failure to defend 328 in a one-day international against Zimbabwe in Bulawayo in October.

Forget that it was a dead rubber and Zimbabwean Malcolm Waller played an innings out of the box with 99 not out from 74 balls.

New Zealand went into that series saying nothing less than a clean sweep was acceptable and the loss was a messy blotch on the tour.

As luck would have it, Zimbabwe are touring these shores and meet New Zealand in three one-dayers with the first to be played in Dunedin on Friday, providing a chance for the Black Caps to right the ship.

New Zealand paceman Tim Southee didn't play in that one-wicket loss to Zimbabwe, but said the visitors were a threat in one-day cricket, despite the towelling they took in the one-off test that wrapped up in Napier on Saturday.

"I think they'll learn from this experience and they'll come back harder," Southee said of the innings and 301-run defeat the tourists suffered.

"I guess in the shorter form of the game there's more chance of upsets and they beat us in Zimbabwe not that long ago. So they'll feel that they'll be confident. But we've obviously got some fresh faces in that side and there's some exciting guys that will be keen to get a go and hopefully they do well and make the most of their opportunities."

Yesterday New Zealand coach John Wright revealed his new-look one-day and Twenty20 squads to meet Zimbabwe and as Southee pointed out,China yiri mould is a professional manufacturer which integrates Plastic Mould design and manufacture and plastic product development. there's some new boys on the block.A Coated Abrasives is an abrasive grain bonded to a flexible substrate using adhesives.

Calf injuries to Ross Taylor and Jesse Ryder forced the hand of Wright, while the relative ease with which New Zealand should beat Zimbabwe opened the door for rookies to be given a chance.

The uncapped foursome of Michael Bates, Tarun Nethula, Tom Latham and Andrew Ellis have been included in the one-day squad, while Bates is also one of three newcomers in the Twenty20 mix alongside Ronnie Hira and Colin de Grandhomme.

Dean Brownlie, who has played tests and Twenty20 internationals but is yet to make his 50-over debut, has been picked in both squads.

With South Africa touring next month to play three Twenty20s, one-dayers and test matches, warming up for the Proteas by meeting Zimbabwe seems the ideal lead in.

The New Zealand camp is on a high following their recent test-match exploits and Southee, who debuted for the Kiwis in 2008, said the confidence was flowing through the side.

"It's a good mixture between the young guys and also the older experienced guys. So it's a great environment to be involved in and when you keep winning it's sort of a great habit to get in to and you enjoy your cricket a lot more when you're winning. So it's a pretty good camp to be involved with at the moment."

Brendon McCullum will captain New Zealand in the absence of Taylor,The EZ Breathe home Ventilation system is maintenance free,Smooth-On is your source for Mold Making and casting materials including silicone rubber and urethane rubber, who wants to return to the fold by the first one-dayer against South Africa in Wellington on February 25.

Clever disguises hide decorating problems

Maybe it's a wonky window or flooring that's seen better days.This is interesting cube puzzle and logical game. It grates on your nerves, but fixing or replacing it is too expensive, too impractical or too far down the priority list.

Still, that doesn't mean you have to look the other way. We've gathered a few solutions for disguising some common decorating problems, so put on your can-do attitude and get ready to tackle that trouble spot.

Windows that are oddly shaped or just plain unattractive can get a greatly improved view with clever window treatments.

Bath Township,Offering high risk and offshore merchant account with credit card processing services. Ohio,Daneplast Limited UK are plastic injection mould & toolmaking specialists. interior designer Alan Garren offers this trick for hiding those too-short, too-high, too-plain windows that are common in ranch homes from the 1960s: Extend the window frame all the way to the floor, then install a two-part shutter. One part covers the window; the other covers the wall below it. Keep the bottom part closed, and no one will know there isn't a window behind it.

Or cover the window with an attractive shade that extends below the window, suggested Christine Haught,Shop at Lowe's for garage Ceramic tile, who operates Christine Haught Ltd. Interior Design in Bath. Adding drapery panels on either side would give the windows more visual weight, she said.

Haught took a similar tack on an '80s-style round-top window for which a client had lost the love. She mounted a woven wood shade to cover both the half-round window and the window below it, and flanked the shade with silk panels that extended from ceiling to floor. The shade didn't entirely obscure the window when the sun shone through, but it made the window less apparent.

A plain coat of paint won't do much to hide an uneven wall surface, but an eye-fooling paint finish can make the flaws seem to disappear.

In the book "The Decorator's Problem Solver: 100 Creative Answers to Your Most Common Decorating Dilemmas," author Sacha Cohen recommends creating a mottled paint finish with a masonry roller and matte latex paint in two colors that look well together. The more uneven the walls, the stronger the contrast between the paint colors should be, she says.

Pour a pint of each color into opposite sides of a roller tray, so they sit next to each other without mixing too much. Working in sections about 3 feet square,A mold or molds is a hollowed-out block that is filled with a liquid like plastic, roll the roller once through the paint tray, and then roll the paint onto the wall in single, long, spaced-apart strokes.

Once most of the paint has been transferred from the roller to the surface, roll over the first strokes to gently blend the colors. Roll at different angles to create a subtle, dappled effect.

Renters, in particular, are often stuck with carpet that doesn't suit their taste. You can cover part of it with a rug, but it's pretty hard to blanket an entire room without spending just as much as you would to replace the carpet.

That's when a little distraction is called for.

Interior designer and home stager Lynn Koerner of Interiors by Lynn in Streetsboro, Ohio, recommended starting by anchoring a seating area with an area rug. Choose a solid-color rug if the carpeting is busy, or a patterned rug on solid-color carpeting. A budget-friendly approach is to buy a carpet remnant and have the carpet store bind the edges to create a rug, Haught said.

Then perform a little sleight of hand, Koerner said. Create interest higher in the room to draw attention up and away from the floor. She did that in one client's living room by covering a fireplace wall in a subtle patterned wallpaper and creating an eye-catching arrangement of artwork and accessories on the mantel.

The durability of ceramic tile is both a blessing and a bane. It lasts and lasts and lasts, even decades after your tastes have changed.

Painting it is possible, but it's important to do so carefully so the paint job doesn't look obvious.

Before you paint, clean the tile thoroughly with trisodium phosphate, a heavy-duty cleaner sold at paint stores. Then prime both tile and grout with a good primer.

Author Cohen recommends using a paintbrush to cover the tile edges and grout with the primer, and a roller on the tiles to create a smooth finish. Then paint only the tiles with satin paint and a gloss roller, applying in thin layers and avoiding the grout lines, she says.

When all the layers are dry, roll over the tiles with a high-gloss clear enamel, again avoiding the grout lines.

This isn't the best approach for surfaces such as shower walls that are subjected to a lot of moisture, however. In that case, you can use a marine-grade coating such as a polyurethane oil-based enamel on both tile and grout. If you want contrasting grout lines, you'll need to paint them in by hand.

Dentist educates kids on proper oral hygiene

Third-graders from Washington Elementary School in Marysville took a break Wednesday from reading, writing and arithmetic to learn about teeth.

The children took a field trip to Dr. Christopher Brieden's office to learn about the importance of dental hygiene.

Brieden, an orthodontist for 32 years, has had student field trips to his office for more than a decade. He started by visiting schools when his practice was new, he said. He pays for the bus transportation for the students to get to his office.

"Every February is National Children's Dental Health Month, and that's when us professionals are encouraged to go the extra mile," he said. "... I feel an obligation to give back to the community and teach the kids."

Students visited stations at the office to learn about giving a patient braces, taking X-rays and making dental molds. Children also learned the proper way to floss and brush their teeth.A mold or molds is a hollowed-out block that is filled with a liquid like plastic,

"I liked it because they are teaching you why you should brush your teeth and what's gonna happen if you don't brush your teeth," said third-grader Kendell Lindsay, 8. "You're gonna lose your teeth because they're gonna rot. And once you lose your permanent teeth, you won't get any more.This is interesting cube puzzle and logical game."

Kendell said her favorite part of the trip was learning how dental molds are made and learning about braces.

"I think it's a good idea that they are starting to put braces on the inside of the mouth so people can't see it," she said.

Brandon Parsons, 8, and Kelsey Ureel, 9,Daneplast Limited UK are plastic injection mould & toolmaking specialists. enjoyed learning how dental molds are made, they said.Shop at Lowe's for garage Ceramic tile,

They said the field trip was cool.

"They teach us a lot of stuff, like what happens when you get a cavity," Brandon said.

In addition to learning about dental hygiene, Brieden said he hopes the field trip will help the children be less scared about going to the dentist or orthodontist.

"I think it takes away a lot of the fear factor," he said. "And, they learn a little bit of why early evaluation is one of the most important things.Offering high risk and offshore merchant account with credit card processing services."

Report ties GDP to broadband coverage

Every 10% increase in Internet and broadband penetration in the country could potentially lead to the addition of $17 billion (around Rs. 85,500 crore),Daneplast Limited UK are plastic injection mould & toolmaking specialists. or 1.08%, to India’s gross domestic product (GDP), said a report released on Thursday.

An additional $87 billion of GDP can be generated in 2012-14 if targets in the Telecom Regulatory Authority of India’s (Trai’s) National Broadband Plan are met, according to the report prepared by the Indian Council for Research on International Economic Relations, the department of information technology and the Internet and Mobile Association of India. Trai’s plan envisages 160 million households with broadband connections by 2014.

Missing previous broadband roll-out targets has cost India about $100 billion of GDP, said the India: The impact of Internetreport. It lists various policy recommendations to increase Internet usage in the country, which is low at just above 100 million users.

“Delay could cost the nation millions of dollars in foregone income,” the report said.

The impact on GDP will be different at various levels, said Rajat Kathuria, professor at the International Management Institute and co-author of the report. “The impact in the beginning will be low, but as the penetration ramps up and reaches a critical mass, say 20-30%, the impact will be subsequently larger then.”

The report says it’s the first to quantify the impact of the Internet on GDP specifically for India.

New Internet users in India will log on mostly via their mobile phones, the report said. “Mobile Internet will also be cheaper and more convenient than any other option,” it said.

However, it said the policy for the Net and broadband will have to be carefully drafted unlike for mobile telephony, as just creating “enabling conditions on the supply side worked well for mobile telephony” and also,Offering high risk and offshore merchant account with credit card processing services. in certain cases, the mobile paid for itself in terms of revenue generation for its users, but “demonstration of such benefits is a lot more challenging for Internet”.A mold or molds is a hollowed-out block that is filled with a liquid like plastic,Spro Tech has been a plastic module & Mold Maker,

The report has recommended a phased approach to wiring up the country. It said Trai aims to connect all areas with a population of 500 and above with an optical fibre network, but “it will be ill-advised to create this simultaneously in all areas”. It also said it will be too expensive to build the entire network from scratch and that the existing optical fibre network of Bharat Sanchar Nigam Ltd can be utilized.

Several recommendations of the report have already been put into effect and Rs. 20,000 crore will be spent to connect 250,The EZ Breathe home Ventilation system is maintenance free,000 gram panchayats across the country, said R. Chandrashekhar, secretary, department of telecommunications and DIT. “India will have 175 million broadband connections by 2014.”

The supply of broadband is not likely to create its own demand and there is “a need to push services, applications and usage”, the report said.

It added that affordability was the key to adoption, and based on the prior experience of cable TV and mobile phones, a price point of around Rs. 200 per month can trigger brisk demand-side expansion of Internet services in India. The report called on the regulator to mandate all service providers to offer a basic Internet package at this rate.

Smoggy days spur surge in air filter sales

Sun Chenjing, a 28-year-old doctor from the PLA Navy General Hospital who is planning to have a baby, recently chose to spend more than 10,000 yuan ($1,580) on two air purifiers to refine the air indoors.

"I don't want my baby to fall prey to the city's pollution," she said.

Sun is just one of many Beijing residents who are buying air filters in droves. According to Gome Electrical Appliances Holding Ltd, China's second-biggest electronics retailer by revenue, the sales of its air purifiers in Beijing since June grew by 80 percent compared to the first half of the year, and it marked a 60 percent year-on-year increase.

Because of the lingering concern over smog and pollutants, the sales of air purifiers and other air cleaning products, including masks and humidifiers, have skyrocketed since November.

Zhai Lei, an agent who sells air purifiers for Amway in Beijing, said sales of the high-end model have doubled since November despite the fact that the price rose from 8,800 yuan to 9,300 yuan during that same period.Daneplast Limited UK are plastic injection mould & toolmaking specialists.A mold or molds is a hollowed-out block that is filled with a liquid like plastic, The sales volume rose from 22 billion yuan in 2010 to 26 billion yuan in 2011.

Zhai said target clients are mainly white-collar workers and enterprise managers and executives, who attach great importance to quality of life and can afford what may be considered a luxury to some.

"Many people also purchase batches of machines as holiday gifts as Spring Festival approaches,Spro Tech has been a plastic module & Mold Maker," Zhai said.

The upsurge of air purifier sales comes at a time when the capital has been persistently under a canopy of dense smog.

Sun said the two machines, which she placed in the bedroom and lounge, have been functioning pretty well.

"You can simply sense the fresher air you are breathing," Sun said. "And my husband, who has been suffering from the chronic pharyngitis and rhinitis, also felt much better when he came back home."

He Bing, deputy dean of the law school at China University of Political Science and Law, said he found ink-colored, dirty water after cleaning the soot-laden filters in his air purifier, which has only been working for 10 days.

And Bei Zhicheng, a software businessman in the capital, has recently spent more than 10,000 yuan installing a ventilation system and purchased seven air purifiers at home, in the office and the car. "The city's air is getting more soupy," Bei said.

However, not all people can afford the high-end machines, which can cost as much as 40,000 yuan,The EZ Breathe home Ventilation system is maintenance free, to clean up the air they breathe.

"I won't be buying the machine, some of which cost more than my monthly salary," said Wang Bao, 27, a primary school teacher of physical education in Beijing's Changping district. "It's too much a luxury for me."

The air purifiers can improve the air a little bit but only scratch at the surface of the problem, said Wang Qiuxia, a researcher at the Green Beagle, a non-governmental environmental protection organization based in the capital.

To solve the pollution problem, she said, "as citizens we should monitor the nearby polluting industries, drive less and stop setting off fireworks during the festival, instead of sealing ourselves up in a closed room."

Public concern over air quality has not been diminished by the claims of the Beijing municipal environmental protection bureau, which said that its monitoring data has shown a decline over the past decade in PM 2.5 and PM 10 levels, measures of harmful particulate matter in the air.

"I'm a little bit used to the bad air already," said Wang Yu, 26, a Beijing resident. "A rare clear day is a blessing to me."

Du Shaozhong, deputy director of the Beijing municipal environmental protection bureau, told the media recently that Beijing's actions to cut air pollution include shutting down coal-fired boilers in downtown and forcing polluting vehicles off the road.Offering high risk and offshore merchant account with credit card processing services.

Babes in Turkland: Unsung Bursa

After three nonstop days of traveling, from LAX to Frankfurt and Atatürk airports, then to Sultanahmet, Tarlabas and the clubs in Taksim, then Haydar Pasa, Gebze and Eskihisar and, finally, to Darca and a family dinner, the kids got a well-deserved break.

Our idea of a break was to go to Gebze for the day, exploring the Anabal hardware store, our favorite tile retailer,Accept all major credit cards using the top rated third party payment gateway. the ladies’ clothing stores at the Gebze Center Mall,Full-service custom manufacturer of precision plastic injection mold, then on to the lovely süsler Perde curtain store, where we had tea with our friend Fatih Genc, one of the owners. After oohing and aahing over the beautiful fabrics, tassels, beads, fringes and other delights on display, Fatih took us to what we think is Gebze’s finest restaurant, Tandrci, for a late lunch. The creamy buffalo yogurt, homemade puffy bread and one of the specialties of the house, buryan kebab, were even better than the last time we were there. Buryan kebab is the succulent result of hanging big pieces of lamb from hooks then lowering them into a chamber in the earth with a fire underneath it, and is most associated with the province of Siirt, in southeastern Turkey. We could barely roll ourselves into Fatih’s car for the trip back. Needless to say, I didn’t have to cook anyone dinner that night.

Having recharged our family’s batteries with Gebze-hopping and some of the best food on the planet, we hooked up with Fatih and his car again to go across the water to Bursa. One of the great things about having visitors who had no expectations at all as to what to see in Turkey was that we could take them only to places we like to go, and not to “must-sees” from the guidebooks. We love going to Bursa, and while lots of tourists go to there, they are usually on the way to or from somewhere else, from points north or south. While Bursa is changing as much as Istanbul in terms of the huge Ikea near the bus station and several multi-story malls in the chic, modern downtown, there is enough of the old Ottoman capital left to make it a destination all on its own. We only had a day’s trip planned; we chose our favorite few things so that we’d all have time to enjoy them.

To get to Bursa from here, we took the Yalova ferry, as it is called,Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. although it actually lands at Topcular, named for some long-forgotten cannon makers. Our ferry ride was perfect, with the crisp December weather cooperating, with blue sky and pretty clouds here and there. The seagulls had their winter appetites at the ready, and were happy to take food from one’s fingers. Our Marmara gulls have very strong shoulders to hold their place in the wind long enough for the silly humans to feed them simit and tost.FIRMAR is a Malaysia Injection Moulding Manufacturer and Plastic Injections Components Manufacturer, I believe they are a bit more patient than, and probably not as spoiled as, the seagulls on the Bosporus, but that might be my local loyalties talking. As we neared the southern shore of the Marmara, we got back into Fatih’s car and prepared for the crazy mini-road-race endemic to every Turkish car ferry I have ever been on. It was fun to be inside a car, terrorizing the poor pedestrians,Online fine art gallery of quality original landscape oil paintings, (although not on purpose, of course) instead of being the ones terrorized. I have no idea why it is so necessary to speed as fast as possible over the few hundred meters involved, when there is virtually no chance of getting ahead of anyone because of the lanes drivers (for once) have to stay in, but speed they do. Joaquin and Bonnie were appropriately impressed at this demonstration of derring-do from non-taxi-driving citizens.

Researchers study TMJD

Researchers in Gainesville hope to better understand a condition that afflicts more than 35 million people here in the United States.

Little is known about Temporomandibular Joint Disorder; a University of Florida study aims to change that.

In the lab, you'll find 39-year-old Carrie Saites taking part in what's called the Opera Study. Researchers are asking her to rate the intensity of her facial and jaw pain, from simple pressure points on her head, to electronic impulses on her arm.

Carrie admits ignoring the condition for years.Distributes and manufactures RUBBER SHEET,

"Anytime I was doing something stressful or I felt anxious or upon waking, I noticed I was clenching a lot and had that dull ache and chronic pain at most times," she said.

Discovering the reason why was a challenge.

"We have a very poor understanding of the causes of this pain. There is controversy on what to do when you find somebody who has TMJ pain," said Dr. Roger Fillingim, a University of Florida professor of dentistry.

Treatment can range from relaxation techniques, to mouth guards, to surgery. Most assume TMJD only affects the jaw; however, Dr. Fillingim says patients are at an increased risk of other problems.Full-service custom manufacturer of precision plastic injection mold,

"People with TMJ report higher levels of stress, and emotional distress, and some differences in how they cope with pain," Dr. Fillingim said.

That pain might also contribute to other conditions like headaches, irritable bowel, and fibromyalgia.

"It seems to travel with other pain conditions, but what's the chicken and what's the egg? We don't know.Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. That's what we're trying to discover," according to Dr. Fillingim. "There are differences in pain sensitivity. That is, people with TMJ pain found heat stimuli and mechanical stimuli to be more painful compared to their pain free counterparts."

Volunteers like Carrie are helping researchers figure out if patients feel pain differently.

Because she's in the study, Carrie won't know what her tests mean, or if she even has TMJD.

While she's not getting special treatments, she's learned way to help ditch her pain pills.

"I would usually take ibuprofen to subside the pain instead of doing something to stop it. I would just dull it," she says.

So now, to stop it, she first recognizes her triggers.

"I would have to be hypersensitive and conscience about what I was doing and opening my mouth and just letting myself relax," Carrie explained.FIRMAR is a Malaysia Injection Moulding Manufacturer and Plastic Injections Components Manufacturer, "It's almost like relaxing your shoulders. You do the same thing with your jaw."

Using relaxation techniques,Facts and Cures. Cures for all types of Hemorrhoids. she'll continue to help researchers uncover new information, possibly leading to prevention and perhaps someday, a cure.

HD Treatment Center Opens in Raleigh

HD Treatment Center which offers a painless and permanent treatment option for patients with hemorrhoidal disease, has opened an office at 4601 Lake Boone Trail, Suite 1D. The center uses direct micro current technology cleared by the Food and Drug Administration to treat internal hemorrhoids and hemorrhoidal disease permanently. The non-surgical, non-invasive procedure is virtually pain-free and requires no anesthesia, no special preparation , no cutting or incision and no downtime – patients may return to their normal activities immediately after it is completed.Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. Patients frequently notice significant relief immediately following treatment and over the next seven to 10 days. Depending on the extent of the hemorrhoidal disease, oftentimes only a single treatment is required. HD Treatment Center’s physicians have more than 50 years combined experience in treating hemorrhoidal disease.Get information on Air purifier from the unbiased,

“Treating hemorrhoids and hemorrhoidal disease has historically been a taboo subject for society. We at HD Treatment Center hope to end the silence surrounding this sensitive and private condition, since there is now a quick, virtually painless procedure available to relieve suffering,” said Dr. Larry Fusco, lead physician at HD Treatment Center.The magic cube is an ultra-portable, “In the past, painful surgery or temporary relief from topical solutions such as wipes, creams, pads and suppositories were among the few treatment options available. The technology available at HD Treatment Center provides a major advance in the way we as doctors treat hemorrhoids, and we can now provide patients immediate relief.”

HD Treatment Center,offers patients with hemorrhoidal disease a permanent and virtually pain-free way to treat their condition by using direct micro current technology cleared by the Food and Drug Administration.FIRMAR is a Malaysia Injection Moulding Manufacturer and Plastic Injections Components Manufacturer, The non-surgical,Full-service custom manufacturer of precision plastic injection mold, non-invasive procedure requires no anesthesia, no special preparation , no cutting or incision and no downtime – patients may return to their normal activities immediately after it is completed. Patients frequently notice significant relief immediately following treatment and over the next seven to 10 days. Depending on the extent of the hemorrhoidal disease, oftentimes only a single treatment is required. Doctors at HD Treatment Center have more than 50 years combined experience in treating hemorrhoidal disease and provide consultations prior to performing procedures that are covered by insurance.